Catalog Unit Specification • 1 Fluid Ounce (30 mL)

Standard one-ounce aroma oils disperse cleanly in water tanks.

Formulated in Chicago for domestic ultrasonic misting. Heavy amber pharmaceutical glass protects botanical terpenes from light oxidation, sealed with cone-lined phenolic caps.

10–25 USD per bottle
Reference unit pricing. Quote depends on botanical extraction yield, isolate purity, and raw harvest fraction rarity.

Our 1 oz aroma oil bottles serve as the primary daily volume for residential ultrasonic diffusers and atomizing cold misters. We compound each batch in our South Michigan Avenue laboratory using steam-distilled botanicals and cold-pressed plant fractions held in a neutral plant carrier. No dipropylene glycol, zero synthetic aerosol propellant, and no synthetic phthalate fixatives.

  • Vessel Capacity 1 fl oz / 29.57 mL (approx. 600 drops)
  • Glass Specification USP Type III Amber Borosilicate (99.2% UV block)
  • Closure Type 20–400 Phenolic Cap with LDPE Polycone Liner
  • Diffusion Format Cold-mist ultrasonic tanks & porous ceramic stone
  • Dosage Guideline 3 to 5 drops per 100 mL clean tap or filtered water
  • Formulator & Workshop Irina Petrova, Chicago studio established 2022
  • Operator Verification Active business filing, Illinois Secretary of State

Formulating balanced terpene ratios for residential misting tanks.

Domestic ultrasonic diffusers rely on a small piezoelectric ceramic disc oscillating at 1.7 to 2.4 MHz. Heavy undiluted raw resins foul that vibrating membrane, creating stubborn dark rings and degrading water atomization within two weeks. We formulate our 1 oz aroma oil bottles with calibrated molecular density so the drops fracture cleanly into cold water vapor without leaving gummy petroleum deposits on the ultrasonic transducer.

Every bottle undergoes viscosity testing before capping. We measure surface tension against standard room-temperature water baths to guarantee that three drops release evenly from our calibrated orifice reducers. Citrus components like cold-pressed bergamot and red grapefruit are fractionated to eliminate phototoxic furocoumarins, making them safe for daily home misting. Conifer fractions from Atlas cedarwood provide persistent anchor notes that hold steady across a six-hour misting cycle without turning sour.

Irina Petrova inspects all botanical lots upon delivery at our Chicago workshop. If a steam-distilled lavender distillation shows traces of synthetic linalyl acetate adulteration during gas chromatography screening, the batch is rejected outright. We maintain complete batch registers on South Michigan Avenue to verify agricultural source and distillation dates for every bottle filled.

Formulation Technical Parameters
Kinematic Viscosity 18.4 cSt at 20°C Optimized for rapid ultrasonic droplet fracture
Carrier Base Caprylic/Capric Triglyceride (Plant-Derived) Odourless neutral carrier, zero glycol dilution
Evaporation Curve 4 to 6 continuous hours Measured in 350 sq ft room at 45% relative humidity
Flash Point > 68°C (154°F) Safe for non-heated room diffusion devices
Macro detail of phenolic polycone seal on amber bottle neck
Plate 102: Cone-lined closure mechanics preventing terpene volatilization 720 S Michigan Ave Workshop • Chicago, IL

How the studio fills, tests, and packs each one-ounce bottle.

Batch Production Milestones
Step 01 • Compounding Precision gravity blending Fractions weighed to 0.01 g on analytical balance
Step 02 • Maceration 72-hour cold integration Allows volatile top notes to bind with conifer bases
Step 03 • Filtration 0.45 micron particulate membrane Removes micro-sediment that blocks misting transducers
Step 04 • Sealing Nitrogen purge & polycone torquing Displaces oxygen before tightening to 14 in-lbs

Compounding begins with the heavy anchor fractions. Atlas cedarwood, Haitian vetiver, and Somalian frankincense isolates are weighed into borosilicate beakers. We add the carrier fraction gradually under mechanical stirring at 120 RPM, preventing shear stress and heat generation that would volatilize subtle floral esters.

The compound rests in dark stainless vessels for three days to marry the aromatic phases. Fresh citrus oils oxidize rapidly when exposed to ambient headspace, so each bottle is purged with an inert nitrogen blanket right before the phenolic closure is screwed down. The polycone wedge pushes directly into the bottle mouth, forming a hermetic liquid seal that prevents evaporation during postal transit across the United States.

Every unit carries a hand-stamped batch code on the base label. If you ever contact our Chicago studio regarding scent throw or evaporation rate, quoting that four-digit code allows Irina Petrova to pull the exact GC/MS retention log and compounding record from our archive binder.

Common formulation questions regarding one-ounce aroma oils.

A standard 1 oz (30 mL) amber bottle fitted with our calibrated dropper plug dispenses roughly 600 drops. When used in a typical 200–300 mL ultrasonic mist tank at 4 drops per session, one bottle yields 150 diffusion sessions. If you diffuse once daily, that represents five months of room fragrance.
Reference pricing reflects raw botanical agricultural cost. Pure steam-distilled coniferous oils (such as fir needle and cedarwood) yield generous volume per ton of biomass, allowing a 10 USD price. Complex compositions containing rare fractions like Roman chamomile, neroli isolate, or precious wood extractions require up to ten times the plant mass, bringing unit price to 20 or 25 USD.
This product is not formulated for reed diffusers. The viscous surface tension tailored for ultrasonic misting does not travel upward through dense rattan capillaries. For reed vessels, select our 9 oz Diffuser Refill. It is also not suitable for topical cosmetic application or ingestion; these are strictly room diffusion compounds.
Store upright in a cool cabinet away from direct radiant heat and sunlight. Always secure the polycone cap firmly after dispensing. When closed tightly, the formulation retains peak aromatic fidelity for 24 months from the stamped compounding date.

Inquire for standard one-ounce aroma oil bottle availability.

We operate an inquiry-first studio without automated shopping carts or speculative inventories. Use this form to specify your room dimensions, desired botanical profiles, or existing diffuser equipment. Irina Petrova reviews incoming requests and replies within one business day with exact batch dates and shipping arrangements.

Direct workshop phone: +1 (340) 006-6875 • Location: 720 South Michigan Avenue, Chicago, Illinois 60605.

Please state your name or organization.
Please enter a valid email address.
Please enter a valid phone number.
Order & Inquiry Protocols
Reference Unit Price 10–25 USD per bottle Subject to selected botanical yield tier
Response Timeline Within 24 business hours Direct review by founder Irina Petrova
Dispatch Origin Chicago, IL 60605 Carefully padded kraft packaging with batch test sheet
Related Catalog Volumes 1/2 oz Bottles • 10 mL Droppers Explore alternate sizes for small spaces or intense sessions